Biblio
Filters: Author is Seborg, D.E. [Clear All Filters]
, “Control-relevant Models For Glucose Control Using A Priori Patient Characteristics”, IEEE Transactions on Biomedical Engineering, vol. 59, 2012. Abstract
, “Pattern Matching In Batch Bioprocesses-comparisons Across Multiple Products and Operating Conditions”, Computers & Chemical Engineering, vol. 33, p. 88–96, 2009. Abstract
, “Pls Pattern Matching In Design of Experiment, Batch Process Data”, Chemometrics and Intelligent Laboratory Systems, vol. 94, p. 43–50, 2008. Abstract
, “Identification of Empirical Dynamic Models From Type 1 Diabetes Subject Data”, in 2008 American Control Conference (acc '08), 2008. Abstract
, “Evaluation of A Pattern Matching Method For the Tennessee Eastman Challenge Process”, Journal of Process Control, vol. 16, p. 601–613, 2006. Abstract
, “Fault Detection and Diagnosis In Industrial Fed-batch Fermentation”, in 2006 American Control Conference (ieee Cat. No. 06ch37776c), 2006. Abstract
, “Optimal Selection of Soft Sensor Inputs For Batch Distillation Columns Using Principal Component Analysis”, Journal of Process Control, vol. 15, p. 39–52, 2005. Abstract
, “Clustering Multivariate Time-series Data”, Journal of Chemometrics, vol. 19, p. 427–438, 2005. Abstract
, “Assessing the Need For Process Re-identification”, Industrial & Engineering Chemistry Research, vol. 44, p. 2767–2775, 2005. Abstract
, “Effect of Data Compression on Pattern Matching In Historical Data”, Industrial & Engineering Chemistry Research, vol. 44, p. 3203–3212, 2005. Abstract
, “Application of Steady-state and Dynamic Modeling For the Prediction of the Bod of An Aerated Lagoon At A Pulp and Paper Mill - Part I. Linear Approaches”, Chemical Engineering Journal, vol. 104, p. 73–81, 2004. Abstract
, “Application of Steady-state and Dynamic Modeling For the Prediction of the Bod of An Aerated Lagoon At A Pulp and Paper Mill - Part I. Linear Approaches”, Chemical Engineering Journal, vol. 104, p. 73–81, 2004. Abstract
, “Application of Steady-state and Dynamic Modeling For the Prediction of The Bod of An Aerated Lagoon At A Pulp and Paper Mill - Part I. Linear Approaches”, Chemical Engineering Journal, vol. 104, p. 73–81, 2004. Abstract
, “Estimating Product Composition Profiles In Batch Distillation Via Partial Least Squares Regression”, Control Engineering Practice, vol. 12, p. 917–929, 2004. Abstract
, “An Evaluation of Mimo Input Designs For Process Identification”, Industrial & Engineering Chemistry Research, vol. 43, p. 3847–3854, 2004. Abstract
, “Analysis of the Deltaaic Statistic For Optimal Detection of Small Changes In Dynamic Systems”, in Proceedings of the 2004 American Control Conference, 2004. Abstract
, “Fault Detection Using Canonical Variate Analysis”, Industrial & Engineering Chemistry Research, vol. 43, p. 458–474, 2004. Abstract
, “Application of Steady-state and Dynamic Modeling For the Prediction of The Bod of An Aerated Lagoon At A Pulp and Paper Mill - Part Ii. Nonlinear Approaches”, Chemical Engineering Journal, vol. 105, p. 61–69, 2004. Abstract
, “Application of Steady-state and Dynamic Modeling For the Prediction of the Bod of An Aerated Lagoon At A Pulp and Paper Mill - Part Ii. Nonlinear Approaches”, Chemical Engineering Journal, vol. 105, p. 61–69, 2004. Abstract
, “Application of Steady-state and Dynamic Modeling For the Prediction of The Bod of An Aerated Lagoon At A Pulp and Paper Mill - Part II. Nonlinear Approaches”, Chemical Engineering Journal, vol. 105, p. 61–69, 2004. Abstract
, “Analysis of the Deltaaic Statistic For Optimal Detection of Small Changes In Dynamic Systems”, in Proceedings of the 2004 American Control Conference, 2004. Abstract
, “Monitoring Model Predictive Control Systems Using Pattern Classification And Neural Networks”, Industrial & Engineering Chemistry Research, vol. 42, p. 4689–4701, 2003. Abstract
, “Monitoring Model Predictive Control Systems Using Pattern Classification and Neural Networks”, Industrial & Engineering Chemistry Research, vol. 42, p. 4689–4701, 2003. Abstract
, “Data Compression Issues With Pattern Matching In Historical Data”, in Proceedings of the 2003 American Control Conference (cat. No.03ch37465), 2003. Abstract
, “Model Predictive Controller Monitoring Based on Pattern Classification And Pca”, in Proceedings of the 2003 American Control Conference (cat. No.03ch37465), 2003. Abstract
, “Model Predictive Controller Monitoring Based on Pattern Classification and Pca”, in Proceedings of the 2003 American Control Conference (cat. No.03ch37465), 2003. Abstract
, “Teaching Process Control In the 21 St Century: What Has Changed?”, in Proceedings of the 2003 American Control Conference (cat. No.03ch37465), 2003. Abstract
, “Design of Decentralized Pi Control Systems Based on Nyquist Stability Analysis”, Journal of Process Control, vol. 13, p. 27–39, 2003. Abstract
, “Pi/pid Controller Design Based on Direct Synthesis and Disturbance Rejection”, Industrial & Engineering Chemistry Research, vol. 41, p. 4807–4822, 2002. Abstract
, “Pattern Matching In Historical Batch Data Using Pca”, IEEE Control Systems Magazine, vol. 22, p. 53–63, 2002.
, “Identification of Multivariable, Linear, Dynamic Models: Comparing Regression and Subspace Techniques”, Industrial & Engineering Chemistry Research, vol. 41, p. 2185–2203, 2002. Abstract
, “Robust Nyquist Array Analysis Based on Uncertainty Descriptions From System Identification”, Automatica, vol. 38, p. 467–475, 2002. Abstract
, “Clustering of Multivariate Time-series Data”, in Proceedings of the 2002 American Control Conference (ieee Cat. No.ch37301), 2002. Abstract
, “Multiloop Pi/pid Controller Design Based on Gershgorin Bands”, Iee Proceedings-control theory and Applications, vol. 149, p. 68–73, 2002. Abstract
, “Relative Gain Array Analysis For Uncertain Process Models”, Aiche Journal, vol. 48, p. 302–310, 2002. Abstract
, “Pattern Matching In Multivariate Time Series Databases Using A Moving-window Approach”, Industrial & Engineering Chemistry Research, vol. 41, p. 3822–3838, 2002. Abstract
, “Clustering of Multivariate Time-series Data”, in Proceedings of the 2002 American Control Conference (ieee Cat. No.ch37301), 2002. Abstract
, “Composition Estimations In A Middle-vessel Batch Distillation Column Using Artificial Neural Networks”, Chemical Engineering Research & Design, vol. 79, p. 689–696, 2001. Abstract
, “Design of Decentralized Pi Control Systems Based on Nyquist Stability Analysis”, in Proceedings of the 2001 IEEE International Conference on Control Applications (cca'01) (cat. No.01ch37204), 2001. Abstract
, “Identification of the Tennessee Eastman Challenge Process With Subspace Methods”, in System Identification (sysid 2000). Proceedings Volume From the 12th Ifac Symposium on System Identification, 2001. Abstract
, “Matching Patterns From Historical Data Using Pca and Distance Similarity Factors”, in Proceedings of the 2001 American Control Conference. (cat. No.01ch37148), 2001. Abstract
, “Multiloop Pi/pid Controller Design Based on Gershgorin Bands”, in Proceedings of the 2001 American Control Conference. (cat. No.01ch37148), 2001. Abstract
, “Identification of the Tennessee Eastman Challenge Process With Subspace Methods”, Control Engineering Practice, vol. 9, p. 1337–1351, 2001. Abstract
, “Predictive Monitoring For Abnormal Situation Management”, Journal of Process Control, vol. 11, p. 111–128, 2001. Abstract
, “Matching Patterns From Historical Data Using Pca and Distance Similarity Factors”, in Proceedings of the 2001 American Control Conference. (cat. No.01ch37148), 2001. Abstract
, “Model Structure Determination In Neural Network Models”, Chemical Engineering Science, vol. 55, p. 5457–5469, 2000. Abstract
, “Dynamic Data Rectification Using the Expectation Maximization Algorithm”, Aiche Journal, vol. 46, p. 1556–1565, 2000. Abstract
, “Constrained Parameter Estimation With Applications To Blending Operations”, Journal of Process Control, vol. 10, p. 195–202, 2000. Abstract
, “Performance Evaluation of Two Simple Causticizing Control Systems”, Tappi Journal, vol. 83, p. 73–74, 2000.